
Record the two documented table positions
Add one line for the closed side table and another for the unfolded, raised position. Record the measurements in width, depth and height order as shown on the drawing. Request the space needed to unfold and raise the top so the buyer can plan the display around the full movement.
Tie the sample to its component list
Use the sample identifier, board option and finish on every check sheet. Identify the top, manual lift components, storage box, castors and brakes, rails and scratching surface. Ask for the installation and use instructions that apply to those exact components.
Separate measurements and mechanism evidence
Agree measurement points and tolerances with the supplier. A sample measurement records the dimensions you observed. Ask separately for the intended-use limits, operating information and suitable evidence for the mechanism, with a clear link to the supplied configuration.
For each position, record the measurement points, observed dimensions and a photograph. In the operating record, identify the instruction step, any unresolved hand-clearance or movement question and the supplier response needed. Matching the two exterior sizes does not close those operating questions.
Review the whole manual operating sequence
With the supplier's instructions, review how to position the table, apply the brakes, unfold and raise the top, access the storage box and return the top to its closed position. Note hand clearance and contact points during the movement. Record unresolved operation questions before using the sample for a showroom demonstration.
Keep the operating review with the selected instruction revision; use the assembly-instruction review checklist to record unclear steps and missing information.
Keep unresolved issues visible in the sample record
For example, a sample can match both listed dimensions while its lift instructions still need revision. Record the dimensions as accepted, request the corrected instructions, and review the full motion again before clearing the demonstration or related product claims.
Use the same version in the quote and product sheet
Record the approved dimensions, operating instructions, board option and packed contents on the quotation. Ask the German importing team to review the supporting documents for the destination and sales channel. Agree which product information to retain with the approved version.
Wholesale buying checklist
- Identify the sample, model and finish.
- Measure and record both table positions.
- Review the operating sequence, castors and brakes.
- Resolve open mechanism and material questions.
- Match product copy to the quoted version and carton data.
Questions before ordering
How does the table lift?
The catalogue describes manual operation. Ask for the supplied instructions and agree the full operating sequence on the sample.
Can the exterior size establish the load limit?
A load limit requires evidence for the selected construction and mechanism. Ask the supplier for the intended-use limits and supporting record.
Which size should I put on the product sheet?
List both documented positions separately, then confirm the dimensions and clearance required to operate the supplied version.
Product specifications come from the linked NAVORIQ catalogue record. Confirm the selected version and supporting evidence before ordering or publishing retail claims. NAV-F055 / M1025 — Fold & Lift Cat Side Table
Send a model-specific wholesale inquiry
Share your company, destination, NAV-F055 / M1025, estimated quantities and preferred finish. Include the sample, packing or component questions you need resolved.